20 Repair Window Websites That Are Taking The Internet By Storm

When It's Time to Repair Windows
If your windows require repair, you must work with care. First, you should wear a pair of safety gloves and cut-resistant gloves to prevent shards of glass from cutting you as you work.
An easy fix for a broken window is to place an aluminum cover over the crack. This will stop rain, snow and insects from getting into your home.
Cracked glass
Glass that is cracked not only make your home appear less appealing but let drafts and other elements into the home. It doesn't matter if cracks are caused by an impact, such as soccer or baseball or a stress like an abrupt temperature change, but it is important to have them fixed as quickly as you can to prevent further damage and keep your windows working properly.
If your window is cracked, but not broken, an easy fix is to apply clear tape to it. It's an easy and affordable solution that will provide some protection from dust, water bugs, and other squatters and also keep out the elements.
However, if the crack is severe or is getting worse, you should seek out a professional. A skilled glazier will be able to determine the root of the problem and suggest a suitable repair procedure.
A crack caused by an impact is the most frequent type of window break typically resulting from a hard object striking your window with enough force to break it. These cracks usually have an arc of lines and broken pieces. They can be dangerous when they break loose. The crack could compromise the gas that is between the panes of your double-pane windows and lower its energy efficiency.
Another kind of crack is a stress crack which develops gradually as time passes, because of extreme temperature changes or other environmental factors. These cracks begin around the edges of your window, and can eventually grow into full-blown breaks.
A more serious, but doable crack is the pressure crack. This is a curvy, curve that extends across the window on one or more sides. It can be caused by low or high pressure that causes the glass to expand or contract.
If you're willing to go a step beyond nail polish and tape there are a few other products that can be used to repair cracks in your window glass. Glass Repair Film, while more expensive, will provide your windows with more protection and durability. If you'd prefer to go the DIY route epoxy is a durable adhesive that can be used to fill cracks to prevent further damage and make your window look like it never had cracks in the first place!
Leaking Windows
If you notice a damp spot under your window, or you notice that the wood around it is weak or rotting, it may be time to consider a window repair project. The excess moisture can create a breeding ground for mold and mildew which can lead to a myriad of issues for your home. They can lead to indoor air pollution, sagging drywall and can even worsen allergies. If not checked, they could cause structural damage to your home.
If the water is coming from outside or visible through the frame, it's a good idea to contact a professional to help you to fix the problem immediately. Don't put off leaking windows. They are a leading cause of structural damage and mold.
In many cases, a simple layer of caulking is all you need to stop leaks. You'll need to thoroughly clean the area first, though, and remove any old caulking before applying the new layer.
You'll also need to check the weep holes on the frame to ensure they're not clogged with debris. These holes are designed to remove rainwater, but they can also become blocked in time due to insect corpses or other debris.
If windows have double panes You'll also have to check the seal between the glass and the metal frame. This helps to keep the gas from escaping between the panes, making windows more energy efficient. Over time the seal may wear out and allow water to enter your home.
The water stains on the walls and ceiling are another indicator of a leak. The drywall turns discolored when it is saturated with water. You might also find peeling paint as a result of water weakening its adhesive properties and tearing away from the wall.
Faux Muntins & Mullions
In the past, muntins and mullions (or glazing bars in the UK) separated and held panes of glass in classic multi-pane windows. Since the larger expanses of glass that were tempered became available after WWII they went out of fashion. They're mostly used as a decorative element in some older homes.
Rain or wind can cause damage to a single support or a small group, leaving a crack in the window. You can repair the majority of these brittle or decaying elements.
First, clean the affected areas using a sponge and an ammonia-based cleaning agent that doesn't leave a traces. Remove any loose or rotting pieces and trim the intersections of the horizontal and vertical window muntins with an exacta knife. After trimming the intersections, use painter's masking tape to tape off the lower section of the window frame. Apply a thick coat of white paint to the areas you lightly painted in the first pass. Allow the paint to fully dry before removing the masking tape and applying the second coat.
If you're dealing with a more severe problem like a crack that forms an hourglass-like shape in the middle of the window, it's recommended to replace the sash. In these cases, you'll need to look for a replacement that matches the window that is in place in terms of style and size.
To save money you can install an attached grid window. These windows have a full pane of glass that is topped with the muntins being glued to the surface creating a divided look. These windows aren't as energy-efficient as traditional ones.
Installing learn this here now -cap will prevent water from leaking into the window frame. The majority of home centers sell drip caps in aluminum for about $20. They're much simpler to install than a replacement window sash and come with the same function as a real mullion or muntin.
Broken Sashes & Frames
A damaged window sash should be a signal that you should call for help. A broken sash, if not addressed, can lead to water leaks, wood rot and other serious issues to the frame and sill. If you've broken a window sash, replace it as soon as possible to ensure that your window is properly sealed and operating.
The problem is often caused by damaged or improperly installed cords. Luckily, replacing them is relatively simple and can be done in all double-hung windows. You'll first need to remove the tabs of metal that hold the sash. To do this, push up on one side (it doesn't matter which) of the sash then pull in toward the opposite side to take it from the window frame. It is important to remove the strip that is what separates the sash from other side so that you can get to the area where the sash cords are.
Once you've removed the sash, make sure you look at its metal tabs and compare them to the tabs on the new sash. If they're different, it will be hard to place the new one into its slot and affect how the sash functions. Fortunately, this issue can be rectified by placing tabs in the correct positions on the new window.
In addition to the sashes, you'll have to examine your window frame for any damage or decay. It's a good idea to do on a regular basis, as wood shrinks and wears down as time passes. If you find any visible damage, it must be repaired as soon as you can, to avoid an even bigger issue from arising.
If your window frames are in bad condition, you'll need to treat them using a homemade preserver made using half mineral spirits and half boiled the linseed oil. After the treatment has dried for two full days, you can then re-finish your frames using high-quality latex paint. A fresh coat of paint will also protect your window from the elements.