20 Fun Facts About Double Glazed Window Repair

Double Glazed Window Repair
It is worth looking into the warranty that comes with most double-glazed windows. In general, it covers problems with the window hardware - hinges and locking mechanisms within the first 10 years.
A leak in the seal can be the reason for mist appearing between your glass windows. This issue must be fixed immediately to avoid mould or damp forming within your home.
Condensation Between the Windows
If you notice condensation forming between your windows, this could be an indication that the sealing in the insulating gases has failed. This could be a major issue that should be addressed immediately particularly in winter, when humidity is at its highest. This can also cause damage to the sills or sealants and also cause mould.
Double-glazed windows shouldn't have condensation between the panes. This issue could be caused by extreme humidity or a cold snap. Fortunately, this is usually fixable without replacing the entire window. A professional can drill tiny holes in the glass and spray the inside of the window with a specially-formulated cleaning solution. The moisture is then sucked out of the window and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.
Condensation between windows can be due to air leakage or other factors outside of the window. If this is the situation, it is likely to take longer for the moisture to accumulate inside the window, since the air will need to be sufficiently warm for the water molecules to vaporise. In these situations it is best to replace double-glazed windows instead of attempt to repair the sealed units.
A double-glazed window is made from two or three pieces of insulated glass, held together by a frame made of metal. The gap in the middle of the windows is filled with a non-toxic insulating gas like argon or krypton, and then sealed tightly. Discover More Here prevents the insulating gases from leaving and also prevents moisture and air from getting into the gap.
As windows age, seals may be damaged, allowing moisture to enter between the glass panes. When seals fail it is crucial to notice this because it means that the double glazing isn't performing as well as before. This can lead to lower energy efficiency, higher heating costs, damage to the property and the risk of condensation forming between the windows.
Mist
If you notice condensation on the outside of your windows this is totally normal - it indicates that your double glazing is working well and keeping the heat in your home. The condensation happens because the outside air is hotter than the glass, and reaches the dew point of the window prior to the air inside. Double glazing of top quality is a great method to get this.
If the condensation is on the inside of your window then this can be a sign of a problem with the ventilation in your home. This is because the extra moisture has no place to go and ends up on your window as well as in carpets, on furniture and in other places within your home. This can be avoided by having it examined by a professional and ensuring that there is sufficient fresh air in your home.
Another reason why mist appears on double-glazed windows is because the seal between two glass panes has been broken. This can be caused by wear and tear, or by using chemical cleaning solutions. If this occurs it is best to repair the windows as soon as you can.
The professional repair of your windows will ensure they remain dry and free of fogging, condensation and misting. It is also less expensive than replacing your windows and you will save money on your energy bill.
A FENSA registered window installer can provide you with a cost estimate for the repair or replacement of your double glazed windows. If your existing windows are old and have been in use for a long time, you might want to consider upgrading them to new A-rated energy efficient ones.
It is a very good idea to keep copies of any warranties or agreements with your window fitting company. This will be very useful if any problems with the windows develop in the future, and you are able to then contact your fitters to resolve these issues. This is a better option than ignoring the issue, which could lead to further problems in your home.
Close or open with difficulty
It's not just annoying when double-glazed windows can be difficult to open or close. They could also lead to more energy costs due to the loss of heat and drafts. It can also pose security risks, particularly when the locks aren't working properly. It is vital to fix any problems with double glazed windows and doors when you notice them.
If you've tried to open your window using the most basic methods, like using a screwdriver or tapping on the frame with a solid object the problem could be more serious. It could be that the window has shifted in its frame and needs to be re-set or it could be that there is an opening between the glass panes as well as the frames. In either case, contact a double glazing repair expert to ensure that the repairs are done properly and to avoid any further issues.
It's not unusual for UPVC window handle and lock mechanisms to become difficult to operate or stuck particularly if they're old and worn. It is usually caused by the accumulation of dirt or grease inside the handle. This can be easily resolved by cleaning it with a uPVC cleanser. If this doesn't work then you can try gently tapping the uPVC frame with a hard object such as a screwdriver, being careful not to damage the handle or the mechanism for window handles.
If this doesn't resolve the issue, then the window might need to be replaced, as it is likely that the hinges are no longer in the correct position or the locking mechanisms are damaged. In this situation, consult a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or locked shut double glazing window. He has a lot of experience converting old window mechanisms into modern ones. This can save you money by replacing the entire window. Call or email us today for more information or a free estimate.
Warping
Double glazed windows are often the best option for saving energy at home. They consist of two separate panes which have a spacer, or dense gas in between them. This creates a seal that keeps cold air out and warm air inside. In time, however, these windows may be damaged or broken and require repair. Fortunately, the majority of these repairs are simple and can be done without the expense of replacing the entire window.
Warping is a common problem with double-glazed windows. This occurs when windows begin to flex, twist or bow. This can impact the structural integrity and insulation abilities of the window. Double-glazed windows should be properly installed and maintained to avoid this issue.
Get in touch with a professional immediately if you notice that your double-glazed windows are warping. This will help to prevent the situation from getting worse. They will be able to inspect your windows to determine the cause. They will then use special tools to fix the issue and make sure that your windows are completely sealed again.
Water vapour can trigger this problem, as it may build up between windows over time. This could be due to various factors, including weather conditions, humidity levels and temperature variations. To fix this the expert will drill tiny holes in the window to let out the moisture. They will then apply an agent for cleaning to wash the glass and apply an adhesive to protect it from moisture in the future.
Alternatively, if your windows aren't able shut or opened, it may be a sign of a broken mechanism or hinges. Before calling a professional to address the problem, it is worthwhile to grease the parts. This will usually resolve the issue and reduce your need for replacements. If your windows are worn out or do not provide the insulation you want it might be better to replace them.