10 Things We Love About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.
It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.
Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.
Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.
Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.
Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you are happy with the size of the window, you can tighten screws to secure them in place.
If you aren't able to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.
uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.
3. Water Leaks
It is crucial to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem the old caulking may need to be removed before a new layer can be applied. It is crucial to remember that when it comes to uPVC window repair s, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.
It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.
Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.
It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or if it blows open with a breeze. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.
Like any mechanical part hinges will wear out over time. It is very easy to change a window hinge, but it's simpler if you have someone to help hold the frame.
It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.
The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you advice.
It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. The hinges, also because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. If they're beyond repair, it could be required to realign them. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.
The next common cause of draughts is the window seals, these can become worn down or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the possibility of draughts.
One of the most effective ways to cut down on draughts is by using an draught excluder. These are usually fabric tubes filled with some type of filler. They can be put on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!
With a little regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach a point where it is more economical to replace them than repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as possible.