Dont Make This Silly Mistake On Your Window Repair

Window Repairs
Window repairs can help homeowners save money while maintaining their comfort. In the event of severe damages such as broken glass or a cracked frame, a replacement window may be required.
Other issues can be fixed to extend the lifespan of windows. The most frequent issues are:
Cracked or Broken Panes
Whether it's an errant rock being tossed by your lawnmowers, or a tree's branch blown by strong winds, cracked window glass is not only visually unappealing, but also can result in higher electric bills since the broken pieces let cold air into your home. Luckily, it's usually relatively simple to repair windows with cracked panes.
Begin by carefully removing glass with gloves and safety sunglasses. You may have use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, use a gentle paper towel or cloth to wipe the glass's surface and the frame's wood.
After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This will prevent water from entering the frame through the cracks and causing further damage.
A bad crack in double-paned glass can compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is so severe that it threatens the integrity of the window or if the pane inside is not there you might need to call an expert.
Cracks in thermal stress can occur when there's an extreme difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If the cracks are located on two sides of a window it is recommended to replace it rather than attempt to repair it.
If your windows are cracked and not quite ready to be replaced Clear tape can do a decent job of stabilizing the crack and keeping out bugs and cold air. You can cut a piece of nylon stocking or tarp large enough to cover the crack, and stick it to the wall using duct tape. This is not an end-to-end fix, but it will keep cold air out and insects away from your home. If you notice cracks or blemishes on your windows that are older it is recommended to contact your local business to determine if replacing the whole window is the best option.
Rotten Wood
Wood rot is a frequent issue with windows. It can damage a home's appearance and create a safety danger. However, it is possible to fix rotted wood. First, you will need to ensure that the cause of the rot has been dealt with. This can be done by looking for roof leaks or gutters that are not functioning, cracked caulking and any other areas that allow water to enter the wood.
The next step is to remove the rotten parts of the window frame. This can be done using the claw hammer, chisel, or rasp. Once the rotten areas have been eliminated it is time to replace them with new wood. Pre-treated wood is recommended for this task, since it will resist rot. If you cannot replace the timber that has rotted, you can use wood filler and hardener to reinforce the damaged area. This type of product will be found in a lot of hardware stores. To achieve the best results, follow the instructions on the label.
Once you have replaced the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant on the wood. Sikkens for instance is a great one to use.
You can also use a two-part epoxy filler to protect the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is important to follow the instructions on the label. When the epoxy filler is dry, you can sand down the surface of the wooden. It is best to begin with a rough piece of sandpaper, and then progress to a smoother one.
window repair want to do is make the area that has been damaged by exposing it to more water. It is recommended, that's why you should cover the surface repaired with an oil-based primer which will shield it from water. After that, you are able to apply the waterproof wood sealant.
Won't Open
A window that won't open can be caused by a variety of factors. The house could have settled or the wooden frames may have warped in humid weather. Someone might have also put them in place to protect themselves. However, with a little patience and the right tools, many windows that are locked can be opened.
One of the main causes of a window that isn't opening is the accumulation of gunk or debris on its moving parts. Dirt and grime build up on the sliding tracks, hinges and locks over time, says Acme Glass. Additionally, metal hardware may rust when it comes into contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent corrosion and keep your window functioning well.
Stuck windows could also be the result of an unintentional break or loosening of the pulleys used to raise and lower the window. The components may lose tension and cause obstruction when they are placed at least two floors above the ground.
If you're having trouble opening the window try using a pry bar to gently force the window to open a bit at one time. Place a wood block on the frame to give the pry bar more leverage. Also, be careful not to damage the window or wood. Alternately, you can run a hair dryer around the edges of the frame for a few minutes to warm the wood and allow it move more easily.
A faulty spring can also be the reason for windows that aren't able to lift or lower. You'll need to refer to the owner's manual for additional details depending on the person who made your windows.
If you've tried cleaning and lubricating the moving parts on your windows, but they aren't opening, it's probably time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows go from functional to useless because a window that isn't properly shut can expose your home to water damage and burglary. Contact us today to learn more about our replacement windows and our services!