7 Simple Tips For Rocking Your Window Repair

Window Repairs
Window repairs can help homeowners save money and ensure their comfort. Window replacement may be necessary in the event of serious damage like broken glass or a window frame that has been smashed.
Other issues are fixable to extend the life of windows. Some common problems include:
Cracked or Broken Panes
If it's an unintentional rock that was tossed by your lawnmowers or a tree branch blown by high winds, damaged window glass is not only ugly, but it can also result in higher electricity bills as the broken pieces allow cold air into your home. Luckily, it's typically easy to repair windows that have broken panes.
Begin by carefully removing the glass using gloves and sunglasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to wipe the glass's surface and the frame's wood.
After the area is cleaned then apply a waterproof silicone caulking around the frame's perimeter. This will prevent water from getting into the frame through the crack and causing further damage.
A bad crack in double-paned glass may cause gas to leak between the panes, making your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window or the pane inside is not there you might need to call an expert.
Cracks caused by thermal stress can occur when there is a drastic difference in temperature inside and outside your home. This causes the glass to expand and shrink. If the cracks are situated on two sides of a window it is recommended to replace it rather than try to repair it.
Clear tape can be used to close cracks in windows that aren't yet ready to be replaced. It also keeps out cold winds and bugs. You can cut a nylon stocking large enough to completely cover the crack and then glue it to the surface with duct tape. It's not a solution that will last forever however it can be useful in the event of a crisis and keeps insects and cold air from entering your home. If you notice cracks appearing on your older windows it is recommended to contact the local company to determine if replacing the whole window is a better option.
Rotten Wood
Wood rot is a common issue with windows. It can ruin a house's appearance and create a security hazard. It is possible to fix rotted wood. You will first need to identify the cause of the wood's rot. This can be done by checking for roof leaks and gutters that aren't functioning cracking caulking, and any other areas that allow water to enter the wood.
You will then need to take off the rotten parts of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After the rotten areas have been removed it is time to replace them with new wood. Pre-treated wood is suggested for this project since it is resistant to rot. If you are unable to replace the wood that has been damaged You can try using wood hardener or filler to repair the damaged area. The majority of hardware stores sell this kind of product. To get the best results, follow the instructions on the label.
After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. This can be done by applying an water-resistant wood sealant. Sikkens for instance, is a great product to apply.
It is also possible to use a two-part epoxy filler to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. However, it is very important to follow the directions for application on the label. When the epoxy filler is dry it is possible to sand the surface of the wooden. It is best to begin with a rough grade of sandpaper, and then progress to a smoother one.
The most important thing you don't want to do is to make the rotted area even worse by expose it to more water. It is therefore an ideal idea to cover the repaired area with an oil-based primer which will protect it from moisture. After that, you are able to reapply the wood sealant that is waterproof.
It won't open
There are many reasons windows won't open. Wood frames can warp in rainy weather, or the house might have sunk or someone may have closed it for security reasons. But with some patience and the right tools, all windows that are locked can be opened.
Gunk or debris that has accumulated can be a major cause of a window not opening. The buildup of dirt and grime on sliding tracks, hinges, and locks over time, notes Acme Glass. Additionally, hardware made of metal can be rusty when it comes in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent corrosion and keep your window operating properly.
The pulleys that raise or lower the window can become loose, or even break. These components may lose tension and become obstructed particularly if the window is located at least two stories above the ground.
If you have difficulty opening a door, try using a pry-bar to gently push the window open. Place a wood block on the frame to give your pry bar more leverage and be careful not to scratch the window or the wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.
Another common problem for windows that aren't opening is a defective spring that keeps the window jamb from rising or lowering. Depending on who manufactured the windows, you'll need to refer to the manual of your owner for additional instructions.
If you've tried cleaning and lubricating the moving components on your windows, but they won’t open, then it's time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows in your home go from being functional to useless. A window that isn’t properly shut can expose your home to burglary and water damages. Contact supplemental resources to learn more about our replacement windows and services today!