15 Astonishing Facts About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism started to fail? Maybe the window or door handles aren't aligned properly or are difficult to use.
You will lose energy in the event that your double-glazed doors fail to perform as they should. This also increases the likelihood of burglaries. Owen the Locksmith will be able to repair your door lock at a reasonable cost.
Snapped Key
If a key is snapped off inside a lock, it can be extremely difficult. It can also be a security issue in that it can expose you to a burglar if the door is not locked. Fortunately, there are quick fixes you can try to resolve the issue and get your door operating properly once more.
Remember to remain calm. If you panic and begin doing a lot of fumbling around you could end up pushing the broken piece of the key deeper into the lock, thereby making the situation even more difficult.
Spray WD-40, or any other penetrating lubricant into the lock. This will help the broken piece come out more easily. You can also use a screwdriver to help break pieces that might be blocking the way. If you have a piece of the key that is stuck out, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the broken key further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have one of these tools then you can bend a hook using needle-nosed pliers. Finally, you can make use of a pair of tweezers to grasp and pull out the remaining pieces of broken keys.
If you are unable to remove the broken piece of key, use a lock deicer. It is available in most hardware stores and is used to freeze any moisture present in the lock.
If none of these strategies seem to be helping, it might be time to call a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms to ensure that they are simpler to use. Request a repair for your double glazing through us online, or give us a call to discuss your requirements.
Broken Cylinder
A broken cylinder is an extremely risky security issue. Luckily, it's an easy repair for a professional locksmith to complete. A locksmith will have to tap the cylinder in order to fix it. This can be done with the hammer or other tool. However, the most effective method is to make use of a wire or a long match. Then, position the end of the match or wire close to the keyway. After this, the locksmith will strike the lock and break it open. This is better than using a hammer that could cause damage to the lock.
The most frequent cause of cylinder head cracks is overheating. This can happen when the cylinder block and head are made from different metals, including cast iron and aluminium. When different metals heat up and cool down at different rates, it could cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.
Corrosion is a different reason for cylinder fractures. If the cylinder block and head are not maintained properly, they can rust or corrode and cause them to expand more than anticipated. This could lead to cracks over time.
If your uPVC door or window lock is stiff or requires lots of pressure to turn, it can be the result of a number of things. A malfunctioning locking mechanism, misalignment or a worn handle are common causes of this issue.
Fortunately it's a simple and inexpensive fix for most homeowners with double glazing . A professional locksmith can usually solve this issue within an hour of arriving at the home. They can repair the locking mechanisms, or replace the window handles and change the gearboxes based on your particular requirements. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They can even recommend upgrades to 3 Star security Euro cylinders, TS007, that will give you an additional layer of security against burglars. This is a small cost to pay for the peace of mind that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks have complex mechanisms that wear out as time passes and use, so it's not a surprise they occasionally break. It isn't easy to determine the reason behind the broken window handle lock and repair it correctly.
Repairing your damaged handle, regardless of whether it's the internal latch or locking mechanism can increase the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and could cause damage to the door's frame and lock It is therefore worth taking some time to make sure you do it right.
With the window open, loosen the screw that holds the handle with the screwdriver. The screw should be on the inside of the backplate, usually hidden by an eye-catching cap to conceal it for aesthetic reasons. Be sure to not lose any internal components inside the handle, like the plates or levers on the opposite side of the spindle. Ideally, keep these in the same place so you can replace them when needed.
Then, turn the handle to make it 90 degrees to the window frame. Finally, loosen the screw at the back of the handle that fixes it to the internal spindle with a second screwdriver. Once this is released, you'll be capable of pulling the handle away and pull out the broken spindle. Replace it with a new one, ensuring it is the same length as the old one (you can typically find these on the internet or at hardware stores) and then securely screw it in the right place. Be cautious not to overtighten because this could cause damage to the handle or the window frame.
Make sure the new handle is correctly installed after which you can close and test the handle. It should work smoothly and you'll be able to open your windows once again.
While you're working on the handle, be sure to ensure that your uPVC windows are shut properly. If they don't, you could experience draughts and damp in your home as well as compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure that they close properly.
Broken Spindle
It is more typical for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that is a lock mechanism that is located in the window frame. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned, it is likely that the spindle has broken and this could be a very frustrating issue.
There are ways to fix this problem. A professional locksmith can quickly and efficiently repair this issue. They can disassemble the window handle by using a tool that removes the wheel part of the mechanism that is where the spindle goes. This can be done without causing any damage to the handle or causing other damage to the frame of the window.
Once the wheel has been removed, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle, and then examining each component part, noting any wear or damage. This process is typically performed in a clean, well-lit room by skilled technicians.
The next step is to clean the damaged spindle. This will remove any dirt or other debris that might be hindering its normal functioning. After this the spindle is cleaned, it can be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle fits perfectly with the handle.
If the damaged spindle can't be repaired, it could require replacement completely. Home centers sell generic replacements. However, If the style of your window is rare then it will be necessary to find a woodworker or cabinet maker who can duplicate the exact part for you. After the spindle is installed, it can be fixed to the handle. The screw holes on the handle with the screws already in the frame. Once the handle is securely in place, you can use your uPVC windows.