Dont Buy Into These Trends About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like timber and aluminum.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.
For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.
If you plan to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.
Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If upvc window repairs between the door and the window is large, you might prefer a security screen that also includes a window. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sliding.
To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you are happy with the size of the window, you can tighten screws to hold them in the right position.
If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.
uPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.
This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.
Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.
It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.
Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is an easy process but it can be easier to do with someone else to help you hold the frame in place.
It is also important to verify that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by improper installation in the factory. Sending us photos via our website will often resolve the problem. We are happy to give advice.
It is also crucial to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. The hinges can also be unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it is feasible to give them a thorough clean, however in some cases it might be necessary to get them replaced.
The next common reason for draughts are the window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.
Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cozy!
Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.