14 Common Misconceptions About Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an energy efficient investment that stops loss of heat during winter months and helps keep your home cooler in the summer. Repairing your double-glazed windows when necessary is a great way to keep them in good working order.
Over time condensation and misting could affect your double-glazed windows. Double glazed windows can be difficult to open and close.
Broken Panes
A stray ball, a flying pebble from your lawnmowers or even a severe storm can shatter the double panes of your windows and expose your home to the elements. While a damaged glass window is difficult to repair but it doesn't have to be replaced. In fact the insulated glass between the two panes is in good shape and you can repair your double-pane window with a little DIY effort.
To start, you'll need to remove the broken glass from the frame. This will be an unpleasant task and you'll need to take care to prevent any glass shards from falling on the floor or sliding out of the frame. Use a pair of work gloves to protect your hands, and a cloth to protect the area around the broken glass to prevent further damage or breaks. After taking out the broken glass, clean the frame of the window thoroughly to remove any sealant or debris. Sand rough areas of the frame to create a smooth and even surface to install your new window.
After the frame has been cleaned then you can apply a new layer of glazing to the place where the damaged pane was removed. This is the best way to ensure your window stays secure and sealed, and it will save you money by keeping water and drafts from entering the house. The next step is to choose your glazing material. There are several options available, including clear tape which is more robust than regular tape and can keep your window safe from further cracking, and glazing film that is similar to clear plastic wrap. The benefit of this option is that it can be painted over to match the frame you have and will also keep snow and rain out too.
Whatever the material you select regardless of the material you choose, it is essential to press the glazier's points into the seam where the putty meets the frame. These will hold the newly-formed glass in place and assist it stick to the frame. Hardware stores sell glazier's point ropes, which you can roll out onto the frame rabbets.
Condensation
Double glazing can be susceptible to condensation issues. If you experience this issue, it is best to contact the company that supplied the window. Many companies offer warranties and guarantees that provide coverage for these problems. Fogging and condensation between panes of glass is an obvious sign that the seals between your windows are broken and can only be repaired by a professional who will replace both panes.
This process is a little tricky and requires specific tools to remove the old one and replace the new one, but it can be done by a professional who will provide the required equipment. It is best to delegate the job to professionals. These tools can be hazardous.
If you decide to undertake this yourself, make sure you wear gloves and safety glasses to protect yourself from any broken glass pieces that might fly away during the process. It is crucial to remove any putty or metal glazing points from the grooves that will hold the new window. You should also wire-brush the frame and vacuum or wipe it with a damp cloth. When the frame is dry and clean you'll need to purchase a replacement glass that is 1/8 inch shorter in each direction than your window, and then test it into the grooves.
Based on the frame you have, you will then need to apply a layer of silicone caulk to the grooves to ensure that the new pane is secure in the right place. Once the silicone caulk has dried you can smooth it out and make any necessary adjustments. The wood molding will then be put back in place.
If the weather suddenly changes, double-glazed windows could become difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or contract, causing them to slide and become stuck. Try wiping the frames with water and lubricating them when this happens however, it's better to seek help from the company that installed your windows.
Misted
When moisture gets trapped between the glass panes it can cause misty double glazing. Double glazing consists of two panes which are separated by a gap filled with argon for better thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold air outside which allows you to keep your temperature comfortable in your home.
Over time however, this seal may break and moisture will begin to accumulate between the window panes, which causes them to become cloudy. This happens because the space between the panes is heated by sun, causing water vapour to form within it.
This is a normal thing to happen however, if it occurs between the window panes, it can be a problem since it can no longer regulate the temperature of the room and allow the outside temperature to influence the indoor temperature. If you notice your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.
We can replace the individual sealed blown unit without having to replace the whole window, which is a lot less disruptive than a total replacement. Our misty window repair involves removing the glass unit, washing it, and replacing it with a new one to make an airtight seal.
Some companies in the field claim that they can inject chemicals through holes drilled into windows with mist to remove the condensation and fog. We do not recommend using this method. This method is not only ugly, but it can also harm the toughened glass and can leave you with a window that does not completely perform the function it was intended to.
It is essential to address the issue as soon as you can, because if left untreated, it could cause mould growth, which not only damages the window but also poses health risks for your family. Moisture in the window can cause other problems within your home like damp or rot. In some instances, the window may need to be replaced entirely.
Failed or blown
Double-glazed windows consist of two glass panes with an air or inert between them. This improves their thermal efficiency, keeping the cold out and heat in. Over time, the gas can depressurize, leading to a number of problems.
Condensation between the panes is one of the most common. It is not a sign of a window failure however it could be a sign you should reseal the windows. Condensation may be an indication that your double glazing has failed in which case it should be replaced completely.
Double-glazed windows can also cause draughts. double glazing repair Sidcup could be because of the seal being damaged or a damaged handle or a damaged lock. It is crucial to address this problem as soon as you can. A draft will force you to pay more for heating. Test the seals on the window frame by smelling cold air.
You may also see water beads on the interior of windows if the window seals aren't performing as they should. This is a sign that you should re-seal your double glazed windows.
Your window frames are made to move a little bit, as they need to do in order to keep the glass sheets in place. As time passes, this particular packaging material may become compressed. This can cause the seal to be broken. This allows air to circulate between the panes, reducing your window's energy efficiency.
Double glazing that has blown an air seal is a sign of failure and needs to be repaired immediately. A damaged seal can stop your double glazing from fulfilling its primary function, which is to keep the cold out and warm air in. A blown seal can also let moisture in your home, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist when you spot a damaged window seal. They can repair or replace the entire unit.