Fitting a Cat Flap

The process of installing a cat flap may be a bit daunting but it's simple to install with the right instructions. Find out how high you'd like the flap to be (normally, it is at the belly height). Mark this point on your door and then use the template provided to guide you when drilling.
If you have a small kitten hold the door open a bit and gradually encourage it to pass through. Reward it each time it goes through.
Take Read Home of the door
A cat flap is a wonderful option to let your pet leave and come into and out of your house as it pleases. This can help keep your cat healthy by making sure that it is exercising as well as being able to come back in if it is stuck outside in the rainy weather, especially in winter. This will reduce the amount of time you allow your cat in or out and make your home secure by letting you know when it's left.
It is essential to ensure that the cat flap is installed correctly in order to prevent your pet from being forced through it or escaping by other animals (e.g. dogs). It is essential to measure the height of your pet's belly and the entrance to your home in order to ensure that the flap is at the proper height. You can adjust the height of your flap when your cat is taller or less than average.
The next step is to utilize a spirit level mark the centre of the door where you will install the flap. Then, using the marks as an outline, cut the form of your flap using the aid of a Jigsaw. After you have cut the flap then sand the edges to create smooth surfaces. Drill any holes you need to.
The process of fitting a cat flap isn't as complicated as you think, and it shouldn't take more than two hours to finish the entire process from beginning to finish. The process can be slightly more difficult if you have to put it in the case of a uPVC door or a composite one. This is due to the fact that these doors come in a variety of thicknesses, which could affect the way holes are cut. This is why we recommend hiring a professional to carry out the job, particularly in the event that you've never worked with glass before.
Measure Your Cat
You will not have to spend hours of ignoring the pet's meow to be allowed in or out. This is especially helpful for cats that are inside during the winter months when you are at work.
If you are planning to install a cat flap on your door, it is essential that you take measurements of your cat prior to attempting the task. It might seem like a straightforward task, but it is crucial to make sure you measure the right measurements. If not, your cat may find it difficult to use.
First, ensure that your cat is calm before taking measurements. You'll need to keep them in a manner that they are not able to move, and make sure that the ruler or measuring tape is flat against their body, not bending in any place. You can get an accurate measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.
Once you have your cat's measurements, it's time to examine the door to decide where to place the flap. Place the flap at the level of your cat's belly. This will allow them to go through the door without much effort. This will also stop the flap from making a lot noise as it swings back and forth.
You will also need to take into consideration the thickness and structure of the uPVC door or composite. While timber doors are all of the same thickness, uPVC and composite doors can be very different in their overall design and can make fitting the cat flap more difficult since you have to ensure that the hole you cut is the right size for your pet.
You can also use the template drawing included in the instructions to mark the location of the hole in the door. This will allow you to determine where the opening needs to be and make sure that the template is placed correctly on the door. It is also a good idea to use a spirit-level to ensure that the template is placed in a straight line against the door.
Cut the Flap
You'll need to make a hole in the door panel to install your cat flap before you can put it in place. This can be a tricky job, and it is recommended that you get help from a professional cat flap fitting service for this step should you not have the expertise or knowledge to tackle it yourself. You can also consult the instructions that come with the kit to learn how to do it right.
You can use the height of the cat's or kitten's stomach to guide you. A good rule of thumb is to set the cat flap about 10-15 centimeters from the ground as this is roughly the average belly height for cats. This way your cat will be able to go through the flap comfortably and will also make other cats or snooping neighbours an issue when trying to get in or out.
The position of the cat flap on the door with a pencil. Next, if your kit includes an outline of paper, place this over the door and use the markings to drill holes in every corner of the template. Then, you'll be able cut out the template shape and replace it with the cat flap.
If you are installing your cat flap on the form of a door made of wood or uPVC, you are able to do it yourself if you feel confident enough to handle using a Jigsaw. Ensure that you do not cut through any of the door's mullions or vertical rails. You can use a jigsaw to cut your panel into a square or a circle depending on the way you'd like to cut it. Take your time and don't try to force the jigsaw into cutting faster.
Once the hole is made then carefully insert the flap onto its new home and make sure that it is firmly fixed. If the flap has screws, push them onto the protruding bolts. Once the screws are in place, you can sand any rough edges of the cut then apply sealant around any gaps to ensure that there aren't any draughts entering into your home.
Place the Flap
If you have an ordinary cat flap, you can help your pet through it by placing a small amount of cat food on the outside of the door. You can also try pushing the cat using the help of a stick or your hands. Once your cat has become accustomed to walking through the flap it will be in a position to move as it pleases. This will allow you to let it in and out whenever it wishes.
It is possible to put a cat flap in the UPVC doors or glass door, but it's not as easy as installing one in a wooden external door. please click the following webpage is due to the fact that the UPVC doors and certain types of glass doors do not have an even thickness. This can have a dramatic effect on the way you cut the hole for the flap and can also affect whether your flap is fitted correctly after it has been put in place.
The mounting kit may include a template showing you where to drill holes. If the kit does not include a template you can create one yourself. When cutting, it is important to not push the jigsaw hard so that you don't create a larger hole than is necessary in your door.
Most cat flaps are rectangular or square in shape, but there are also some which are circular, and are usually more difficult to install. If you have a circular flap it's important to make sure the hole is in the correct position on your door because if it's not, your cat won't be able to use it and could be stranded in the open all day (or even night).
Some cat flaps have locks that allow you to determine when your cat is allowed to enter and leave. These can be very useful in the event that you are concerned about your cat going out at night and coming back in the darkness, or if you're at work for the entire day. The lock can be engaged for entry or exit and some can be locked in both directions, permitting you to close the door completely, which is especially beneficial for cats with a chronic illness or older age who aren't keen on going out in rainy weather.