The Three Greatest Moments In Window Repair History

Window Repairs
Window repairs can save homeowners money and make their homes comfortable. In the event of severe damages such as broken glass or a cracked frame, a replacement window may be required.
Many other issues can be fixed to extend the lifespan of windows. Common problems include:
Cracked or broken panes
It's a rock that's been that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, cracked windows are not just visually unappealing, but also can result in higher electric bills since the broken pieces allow cold air to enter your home. It's fairly easy to fix windows that have broken panes.
Begin by carefully removing glass using gloves and sunglasses. You may need to use an utility knife to break loose the old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame with a soft cloth or paper towel.
Once the area is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This will prevent water from entering the frame through the cracks and cause further damage.
If you have double-pane glass, cracks that are severe could damage the gas layer between the panes and make your windows less insulative. If the crack is severe enough that it threatens the integrity of the window or if the pane inside is not there it is possible to consult an expert.
Cracks caused by thermal stress can occur when there's an extreme difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If this happens to two portions of a window, it's probably best to replace the window instead of attempting to repair it.
Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It can also keep out cold winds and bugs. You can cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This isn't a long-term solution however it can be useful in the event of a crisis and keeps cold air and insects from entering your home. If your windows are old and you're beginning to see cracks in the glass, it's an excellent idea to talk with your local window company to determine if replacing the entire window would be a better option for you.
Rotten Wood
Wood rot is a common problem for windows. It can ruin the appearance of a home and also pose danger to your safety. It is possible to repair damaged wood. First, you must identify the cause of the wood's rot. Check for roof leaks and other areas that water may get into the wood.
The next step is to take out any rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After the rotten areas have been cleared then you must replace them with fresh wood. Pre-treated window repair near me is recommended for this project, as it will resist rot. If you are unable to replace the rotted wood You can try using filler or wood hardener to strengthen the damaged area. The majority of hardware stores sell this kind of product. Follow the directions on the label of the product to ensure the best results.
After you have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant to the wood. A product such as Sikkens is a great choice to accomplish this task.
You can also apply an epoxy filler that is two-part to shield the wood from further damage. It is easy to apply and leaves a nice finish. It is crucial to follow the directions on the label. After the epoxy filler has dried, you are able to sand the surface of the wood. Start with a rough sandpaper, then move to more smoother grades.
The last thing you want to do is to make the area that is rotting even more by expose it to more water. It is therefore recommended to cover the repaired area with an oil-based primer that will shield it from moisture. Then, you can apply the waterproof wood sealant.
The Won't open
There are many reasons why windows don't open. The house could have settled, or the wood frames might have warped due to wet weather. There is also the possibility that someone nailed them shut for security. With a bit of patience and the right tools, you can open the majority of stuck windows.
The accumulation of gunk or debris could be the main cause of the window not opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, notes Acme Glass. In addition, metal hardware is prone to get rusty when in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can prevent corrosion and keep your window working well.
The pulleys used to raise or lower the window can become loose, or break. These parts can lose tension and become obstructed if they are located at least two floors above the surface.
If you are having trouble opening the window, try using a pry bar to gently push the window open a little at one time. Put a piece of wood on the frame to give your pry bar more leverage and be sure not to harm the window or the wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.
Another issue for windows that aren't opening is a defective spring that keeps the window jamb from rising or lowering. Based on the manufacturer of your windows, you will need to refer to your owner's manual for further instructions.
If you've tried cleaning the moving parts of your windows and lubricating them but they're still not opening, it might be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to inoperable because a window that isn't properly shut can expose your home to burglary and water damage. Contact our team today for more information on our replacement windows and services!